This micrometer foot pound torque wrench has a fixed head for reliability and durability. It sports a 1“ drive for added strength with a square male pear-type head. The length is 69 inches but the kit includes 2 handle extensions which take the overall length to 107.5 inches. Total weight is 53 pounds.

The minimum torque for this model is 200.0 pounds. The torque can be increased in 5-pound increments to a total of 1,000 pounds. The wrench retains calibrations for 30,000 cycles under normal workload conditions. An audible click is given when the desired torque is met. The calibration is accurate to 3% clockwise, 6 % counter-clockwise at 20% to 100% of scale. The tool comes in a durable metal storage box.

Advantages:
This dynamic tool is crafted from high-strength alloy steel for longevity. It is strong enough to tackle a heavy workload yet precise enough to maintain consistent accuracy. The extensions add versatility, making the tool easier to handle for the operator. The large range of AA torque (to 1000 ft lb max.) and AB torque (to 2000 ft lb max.) give the tool a wider spectrum of application.

Disadvantages:
The tool takes a some time to get comfortable with and operators will need to learn to listen for the click to indicate the desired torque has been reached. Setting the micrometer takes care to do correctly but with practice can be mastered.
The Proto name is well-respected in industry and this tool keeps the solid reputation intact. It is tough, accurate and versatile for use in production of all types. For heavy-duty jobs, the Proto Foot Pound Fixed Head Torque Wrenches AA-6023 is an excellent choice.

This is a production-grade tool that has the capabilities needed to install fasteners, test torque and store information. You’ve got the choice of lbf-in, lbf-ft, Kgf-cm and N-m. The Cedar DIW-120 measures in peak, real time and peak down modes. High and low set points can be programmed and the green/red LED indicator and audible tone signal when the indicated torque is achieved. 400 measurements can be stored and then transferred via the RS-232 output port. The rechargeable Ni-Cad batteries offer approximately 8 hours of run time.

Advantages:
This wrench is capable of doing everything needed on a typical job, from tightening to testing. It is built to withstand the rigors of production but has the quality electronics needed for precise testing. This is a tool that will help any operator achieve accurate, consistent results time after time.

Disadvantages:
The measurement storage is 400 which is fewer measurements than some tools in this class. The 8-hour battery time is good, but could be better. It might make sense to plug it in for recharging when not in use, even if the batter isn’t low.

The Cedar DIW-120 Digital Torque Wrench is the go-to choice for a wide range of applications in scientific and industrial fields. It demonstrates the quality, durability and precision that operators rely upon for high-volume work loads. That’s why it is one of the best-selling digital torque wrenches on the market.

Digital torque wrenches need to be precise, easy to use, and have plenty of memory. The Tohnichi Model CEM360N3X22D Digital Torque Wrench covers those bases and many more. Set up is fast using the push-button and LCD display, the tool is lightweight and delivers digital accuracy you can count on when torque has to be absolutely precise. This Tohnichi Model CEM360N3X22D Digital Torque Wrench review will cover the top features of this industrial-grade wrench as well as discuss the advantages and disadvantages of purchasing it.Top Features of the Tohnichi Model CEM360N3X22D Digital Torque Wrench

The torque range on this wrench is 72-360 NM with an outstanding accuracy of +/- 1% of indicated torque value. The 0.4 resolution ranks it as one of the best in its class of tools. The Tohnichi CEM360N3X22D comes with both CW and CWW testing instructions that are clear and easy to follow. Its capabilities include run/peak modes and it will store 999 measurements. A RS232 port is included for transferring the data using a USB cable.The ratcheting head that comes with it is the QH22D 3/4″ square drive which is removable. Other heads are sold to make this tool even more versatile. The Nickel-MH battery is rechargeable and the kit includes the charger. The tools weighs just 2.5 pounds and is 28 inches long. The Tohnichi Model CEM360N3X22D Digital Torque Wrench comes with a Certificate of Calibration.

Advantages of the Tohnichi Model CEM360N3X22D Digital Torque Wrench
This wrench is built to tough industrial standards. It is an excellent choice for performing loosening and retightening tests necessary to demonstrate precise torque on fasteners. The onboard chip captures and stores peak torque and attaches a time/date stamp as well. It can be used both for tightening and testing the torque of fasteners. This is a popular tool with automotive manufacturers but can be found wherever precision and consistency counts.

Disadvantages of the Tohnichi Model CEM360N3X22D Digital Torque Wrench
This is an expensive tool, though priced very competitively. However, it may simply be beyond the price range of some potential users. The 72-360 NM range is good, though some tools offer a broader range.

Conclusion
Tohnichi is a trusted name in the industrial tool industry and the Tohnichi Model CEM360N3X22D Digital Torque Wrench demonstrates why. It takes just a few minutes to learn, is easy to set up and offers digital accuracy that provides the consistency demanded on the job.

For long duty jobs the ideal tools are lightweight, reliable and easy to use. They hold their calibration throughout the job without the need to reset it. That’s what the Beta 598/200SL 1″ Drive Direct Reading Torque Wrench offers, along with 200-2000 NM torque range with +/- 4% accuracy. This tool is made by Beta Utensili, an industry leader in the manufacturing of professional tools. Popular in Gran Prix racing garages, tools like the Beta 598/200SL 1″ Drive Direct Reading Torque Wrench will prove just as effective in your shop. Our Beta 598/200SL review continues with a list of features along with the pros and cons of owning this tool.

Top Features of the Beta 598/200SL 1″ Drive Direct Reading Torque Wrench
This tool offers good range, from 200-2000 NM and is designed for jobs with tight tolerances. It uses graduations of just 2 NM. The accuracy to within 4% applies across the entire operating range and also to both RH and LF use. Presets hold steady so there’s no need for constant recalibration. The Beta 598/200SL uses a dial with a preset needle. Turn the wrench until the torque indicator pointer reaches the needle and accuracy is assured. A signal light and tone also let you know the proper torque has been achieved.

Advantages of the Beta 598/200SL 1″ Drive Direct Reading Torque Wrench
It is clear that Beta Utensili has a good grasp on what its customers need in a precision torque wrench. The quality of the materials is excellent and the high functionality of the wrench is obvious from the first use. This tool is accurate, precise, handy and very easy to use. At just 7 lbs, it is a good choice for repetitive work and won’t produce excessive hand and wrist fatigue. The Beta 598/200SL 1″ Drive Direct Reading Torque Wrench ships in its own shock-proof case for protection and storage.

Disadvantages of the Beta 598/200SL 1″ Drive Direct Reading Torque Wrench
Like all tools of this caliber and sophistication, it needs to be handled with some degree of care. While the dial is well-built and the tool is rugged, its an expensive tool and appropriate caution should be used with it.

Conclusion
For reliable accuracy and usability, the Beta 598/200SL 1″ Drive Direct Reading Torque Wrench is a dependable choice. When you need a tool you can put your confidence in, this one won’t let you down.

Wright tools has one of the best reputations for quality and precision in the industry. They manufacture a wide range of quality inch/pound and foot/pound micro-adjustable torque wrenches as the Wright Micro-Adjustable Torque Wrench, 300-2000 Ft. Lbs. 8449 demonstrates. This best-in-class wrench offers rugged design that remains incredibly accurate — +/- 4% clockwise and +/- 6 % counterclockwise @ 20% of the scale. Alloy tool steel guarantees that this wrench won’t let you down, assuring accuracy for the life of the tool. This Wright Micro-Adjustable Torque Wrench, 300-2000 Ft. Lbs. 8449 review will look at the top features of this wrench, which is the heaviest-duty model in the Wright micro-adjustable foot/lb family. Then we will cover the pros and cons of owning this tool for your shop.

Top Features of the Wright Micro-Adjustable Torque Wrench, 300-2000 Ft. Lbs. 8449
This is a well-built tool that should last indefinitely. Every detail exudes quality design and craftsmanship. The design makes it easy to learn and operate, with a positive lock with a pull-down lock ring that holds tight even if the tool is jarred. The head style is fixed and non-ratcheting. The total weight of the Wright Micro-Adjustable 8449 is 48 lbs. Overall ratcheting length is 108.5 inches. It comes with a certified Certificate of Calibration.

On the job, the accuracy of the Wright Micro-Adjustable Torque Wrench model 8449 is unsurpassed. It exceeds all government specs including ANSI B107.14M or GGG-S-686. English scales are primary with Newton meter secondary. The micrometer features clicker functionality that aids in usability.

Advantages of the Wright Micro-Adjustable Torque Wrench, 300-2000 Ft. Lbs. 8449
Quality design and build is evident in every detail of this wrench. It covers a wide range, from 300 to 2000 ft. lbs to give it a versatility you will appreciate.

Disadvantages of the Wright Micro-Adjustable Torque Wrench, 300-2000 Ft. Lbs. 8449
The low-end on this tool is 300 ft. lbs. which limits its use for lighter applications. This series of Wright micro-adjustable tools begins with models at 5 ft. lbs., so another model might better suit your typical applications.

Conclusion
For a top-rated tool with a fantastic balance of accuracy and durability, the Wright Micro-Adjustable Torque Wrench, 300-2000 Ft. Lbs. 8449 is hard to beat. Training new operators on it is quick and the tool presents excellent functionality. For heavier applications, this dependable, quality torque wrench will exceed your expectations for ease of use and accurate reliability.

If you are looking for a quality, precise, and easy-to-use torque wrench, the CDI Torque Dial Torque Wrench, Torque range English 0-2000 in. Lb has a lot to offer. Starting with ease of use, pre-sets are simple with this tool and so is tightening the fastener precisely. A light and buzzer make sure of that. As far as precision goes, this CDI torque dial wrench meets the industry’s strictest guidelines. Quality is found in every detail of the design and the functionality is well thought-out. In this review of the CDI Torque Dial Torque Wrench we highlight the top features for you to compare as you consider the right precision torque wrench for your needs. Then we offer pros and cons of this model that will help you distinguish it from the competition.

Top Features of the CDI Torque Dial Torque Wrench, Torque range English 0-2000 in. Lb
This scientific/industrial torque wrench is built to handle the demands of tight, precise tolerances. It features a torque range of 0 to 40 ft. in. lb/ 0-2800 Nm / 50 NM. It comes with 5 external handles and is equipped with a buzzer and light to indicate when the exact torque has been reached. The overall length is 122″ and it is built with a 1″ drive. The CDI Torque Dial Torque Wrench exceeds standards ANSI and ASME standards with a standard deviation of +/- 4% for both right hand and left hand use. The memory needle gives a visual target with the tightening of each fastener because it stays at the highest applied torque value. The torsion beam design assures durability and quality performance for many years to come.

Advantages of the CDI Torque Dial Torque Wrench, Torque range English 0-2000 in. Lb
There isn’t an easier torque wrench on the market to use. It takes just minutes to train an operator in the setup and execution of each task. It also offers good versatility with a range from 0 to 2000 in. LB while remaining accurate to 4% throughout the range. This tool will give you confidence that every fastener is tightened with precision you can rely upon.

Disadvantages of the CDI Torque Dial Torque Wrench, Torque range English 0-2000 in. Lb
When the preset torque level is reached a light comes on and a buzzer sounds. It’s not a loud buzzer, but some operators may find it becomes annoying at some point. Of course, when the operator is focused on the fastener and can’t see the light, the buzzer is helpful. Depending on your application, the buzzer may be a redundant signal you would prefer not to have.

Conclusion
For ease of use, there’s not a better torque wrench on the market. It features user-friendly design that is easy to learn, a tool that might be of great value on your work bench.

Be sure to visit our homepage for more torque wrench reviews.

When fasteners have to be tightened accurately, piece after piece, or where precision counts on every task, a quality electronic torque wrench can make the difference between meeting stringent requirements and losing the next bid. The Computorq II Electronic Torque Wrench 100-1000 ft/lb is precise and has the capacity to track measurements in high-volume piece work. This is a highly rated electronic torque wrench with the testing functionality to make it one of the most trusted units in the industry. In this Computorq II Electronic Torque Wrench review we will discuss the top features of this wrench and examine advantages and disadvantages of putting it to work in your shop or shop.

Key Features of the Computorq II Electronic Torque Wrench
This digital torque wrench has a lot to offer. It has the largest storage capacity in its class, with a 4000+ torque value memory. The tone will let you know when the memory is full. At that point, you can print the stored values or download them to a datalogger or computer, making your record keeping very easy. Choose the Peak Hold or Track mode for each job as well. The Computorq II Electronic Torque Wrench offers quick set up and use, taking just a few moments to learn and program with such torque values as high and low %, +/- tolerance and more.

The easy to use keypad and bright, clear LCD display make it easy to accurately input important data. Audio signals are given when the minimum high and low preset torque value is reached or the upper limit is surpassed. Bright red and green visual indicators signal for high and low preset torque limits.

Advantages of the Computorq II Electronic Torque Wrench 100-1000 ft/lb
The quality if the Computorq II Electronic Torque Wrench is outstanding. It is built to be tough enough to handle continuous use in an industrial setting. The high-capacity memory on this electronic torque wrench is impressive, saving you time on the job without having to off-load data as often. It also delivers excellent usability that is easy to learn an to try others to use.

Disadvantages of the Computorq II Electronic Torque Wrench 100-1000 ft/lb
The unit uses one 9-volt battery with 60 hours run-time. Some electronic torque wrenches are capable of going more than 120 hours between battery changes. In addition, this is an expensive unit that may be too costly for some.

Conclusion
If you are looking for a top of the line digital/electronic torque wrench and can afford this model, it may be the last one you’ll ever need. It is rugged yet precise and reliable. It scores high in torque wrench reviews for accuracy and durability. We give it our recommendation as well.

If you work in a production or lab environment, then you know the high value of a precise, dependable torque wrench that can be used for assembly and for measuring. The Checkline ETW-SP-1000 Digital Torque Wrench is equipped to meet the demand for precision and consistency. It is loaded with features and a proven track record that make it a valuable tool in a wide variety of settings. In this Checkline ETW-SP-1000 Digital Torque Wrench review we take a look at the key features it offers as well as pros and cons for using it where you work.

Top Features of the Checkline ETW-SP-1000 Digital Torque Wrench
There’s a lot to like about this tool. It offers bi-directional accuracy to greater than 1%, achieving this with a rugged bi-directional ratchet head engineered for durability and performance. The handle of the ETW-SP-1000 features a soft grip that is comfortable and ergonomic.

In terms of the onboard electronics, this digital torque wrench is equipped with a color OLED screen that provides excellent visibility. There are 99 programmable presets available to reduce setup time. The Checkline ETW-SP-1000 Digital Torque Wrench also includes a USB port for output and data transfer when combined with Checkline analysis software. The memory logs 2000 or more measurements and even reminds you when the wrench is due for recalibration — by date or number of measurements.

Advantages of the Checkline ETW-SP-1000 Digital Torque Wrench
For high-volume work, this digital torque wrench saves time while also ensuring consistent accuracy. The internal memory along with tracking software allow for outstanding quality control. It has a guaranteed accuracy to 1% or better and can supply numerous unit selections including Lb-in, Lb-ft, Oz-in, N-m, N-cm, Kgf-m, and Kgf-cm. You’ll enjoy 180 hours of battery life with 4 AA batteries.

Disadvantages
The battery life is good, not great, and a battery change should be scheduled once a week to ensure it gets done so that data doesn’t get lost. Some user-generated torque wrench reviews of this model have suggest the handle could be beefier. However, if the Checkline ETW-SP-1000 Digital Torque Wrench is used by a skilled operator, the risk of damaging the tool is small.

Conclusion
When long-term tracking of performance is essential, the Checkline ETW-SP-1000 Digital Torque Wrench is a great tool to use. It is dependable and accurate, delivering consistent performance for high-volume jobs. It’s a top-ranked digital torque wrench and definitely worth a closer look.

Wright is one of the most trusted names in the pneumatic tool industry and the Wright Pneumatic Torque Wrench Kit BT1800 shows why. Its design and build demonstrates a commitment to quality and an attention to detail. This pneumatic torque wrench is precise, versatile, tough and very durable. It is a popular choice in the garage, shop or factory where precision and power have to be combined in near-flawless performance. Torque wrench reviews rate this tool among the best in its class. Our Wright Pneumatic Torque Wrench Kit BT1800 review will explore the key features of this kit and then discuss pros and cons for you to consider as you compare it to other pneumatic torque wrench reviews.

Key Features of the Wright Pneumatic Torque Wrench Kit BT1800
This is a smooth operator. The Wright BT1800 provides outstanding torque control with continuous rotation to prevent abrupt finishes. It offers the precision control of a hand tool with the power of a impact tool, giving the operator a dynamic tool that can be relied upon in every task. The Wright Pneumatic Torque Wrench Kit BT1800 delivers 400 foot pounds to 1800 foot pounds of torque, producing excellent versatility. It can be used for a wide range of applications in any shop. The torques required can be obtained with certifiable, accurate and safe results.

Advantages of the Wright Pneumatic Torque Wrench Kit BT1800
This pneumatic torque wrench offers versatility, power and precision for a wide range of jobs. Where you want the power of a pneumatic tool along with the ease of use and accuracy of a hand tool, this one will perform up to your expectations. It is ergonomically designed, lightweight, with enough hose to give you excellent reach.

Disadvantages of the Wright Pneumatic Torque Wrench Kit BT1800
There are few drawbacks to this tool other than its high-end price tag. If you don’t have heavy demand for a pneumatic torque wrench, it might be more cost-effective to choose a cheaper model. The Wright BT1800 is a workhorse machine with a price that reflects its capabilities.

Conclusion
If you are in the market for a long-term solution to your torque wrench needs, the Wright Pneumatic Torque Wrench Kit BT1800 should be on your short list of candidates. It has the precision components to perform accurately and also possesses the rugged design to keep working hard for years to come.